# Flight level

In aviation, a flight level is the nominal altitude of an aircraft referenced to a standard pressure datum, as opposed to the real altitude above mean sea level.

To see why flight levels are used, a discussion of the means of measuring altitude is necessary.

Historically, altitude has most easily been measured using an altimeter, which is essentially a calibrated barometer - it measures air pressure, which decreases with increasing altitude. To display altitude above sea level the pilot must recalibrate the altimeter according to the local air pressure from time to time, to take into account natural variation of pressure over time and in different regions. If this isn't done, different aircraft may be flying at different heights even though their altimeters show the same altitude. More critically, different aircraft may be flying at the same height even though their altimeters show different heights. Clearly this is a safety issue.

Flight levels solve this problem by defining altitudes based on a standard pressure of 1013.2 mb (29.92 inHg used in U.S. and Canada). All aircraft operating on flight levels calibrate to this same standard setting regardless of the actual sea level pressure. Flight levels are then assigned a number which is the apparent altitude ("pressure altitude") to the nearest thousand feet, divided by one hundred. Therefore an apparent altitude of 12,000 feet is referred to as Flight Level 120 (except in the United States and Canada -- see note below). Note that aircraft may be at some other actual height than 12,000 feet, but since they all agree on a standard pressure, no collision risk arises.

Flight levels are not used close to the ground, for perhaps obvious reasons - obstacles are fixed to the ground and so their absolute height needs to be known. A vertical region extending from a defined transition altitude to the lowest available flight level is known as the transition layer - pilots will use altitude based on the local pressure below this level, and flight levels above. The altitude of the lowest flight level varies from country. Most begin at 24,500 feet or FL 245. Other countries lowest flight levels begin at:

• FL 145 United Arab Emirates
• FL 150 Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, Yemen
• FL 180 Canada, Puerto Rico, United States, US Virgin Islands
• FL 195 Belgium, Central America, Curaçao, Dominican Republic, Estonia, France, Italy, Lithuania, Malta, México, Netherlands, Panama, Switzerland
• FL 200 Iran, Israel, Jordan, Lebanon, Saudi Arabia (Jeddah FIR only)
• FL 220 Iraq
• FL 255 Egypt
• FL 265 Russia
• FL 285 Bosnia-Herzegovina, Croatia, Finland, Latvia, Poland, Sweden, Turkey, Yugoslavia

Flights above transition altitude being directed by air traffic control will be given flight levels to fly.

Missing image
Flgraphic.jpg

 Contents

(This does NOT apply in the United States or Canada) Flight levels are 500 feet apart, but to further ensure the separation of aircraft, aircraft travelling in different directions in level flight (i.e. not climbing or descending) below FL 245 (24,500 feet) are required to adopt flight levels according to the quadrantal rule, as follows:

• Track 000 to 089° - odd thousands of feet (FL 70, 90, 110 etc)
• Track 090 to 179° - odd thousands + 500 (FL 75, 95, 115 etc)
• Track 180 to 269° - even thousands of feet (FL 80, 100, 120 etc)
• Track 270 to 359° - even thousands + 500 (FL 85, 105, 125 etc)

## Semicircular rule

Above FL245 (In the U.S. and Canada this applies above 3000 AGL (above ground level)), the semicircular rule (also known as the hemispheric rule) applies, which increases separation to allow for inaccuracies that creep into the altimeter at higher altitudes:

• Track 000 to 179° - odd thousands (FL 250, 270, etc.)
• Track 180 to 359° - even thousands (FL 260, 280, etc.)

At FL 290 and above, 4000 ft. intervals are used to separate same-direction aircraft (instead of 2000 ft. intervals below FL 290), and only odd Flight Levels are assigned, depending on the direction of flight:

• Track 000 to 179° - odd flight levels (FL 290, 330, 370, etc.)
• Track 180 to 359° - odd flight levels (FL 310, 350, 390, etc.)

Next time you fly, listen to the captain say what flight level you're at - it will obey this rule according to what direction you are flying in. On the return trip, notice the altitude difference (e.g., FL 290 or FL 330 eastbound, and then perhaps FL 310 or FL 350 westbound).

In the U.S. and Canada, note that the foregoing information applies to flights under instrument flight rules (IFR). Different altitudes will apply for aircraft flying under visual flight rules (VFR) above 3000 AGL.

## Reduced Vertical Separation Minimums

Reduced Vertical Separation Minimum or RVSM reduces the vertical separation above FL 290 from 2000 ft. to 1000 ft. This allows aircraft to safely fly more optimum routes, gain fuel savings and increase airspace capacity by adding six new flight levels. Only aircraft that have been certified to meet RVSM standards, with several exclusions, are allowed to fly in RVSM airspace. RVSM went into effect in Europe between FL 290 and FL 410 on January 24, 2002. The United States, Canada and Mexico transitioned to RVSM between FL 290 and FL 410 on January 20, 2005. (Southwest Airlines retired their last 737-200 on January 17, 2004. America West operated their last 737-200 revenue flight on January 19, 2004. Both airlines were eliminating this type from their fleet and did not schedule them for RVSM upgrades.)

• Track 000 to 179° - odd thousands (FL 290, 310, 330, etc.)
• Track 180 to 359° - even thousands (FL 300, 320, 340, etc.)

At FL 410 and above, 4000 ft. intervals are resumed to separate same-direction aircraft and only odd Flight Levels are assigned, depending on the direction of flight:

• Track 000 to 179° - odd flight levels (FL 410, 450, 490, etc.)
• Track 180 to 359° - odd flight levels (FL 430, 470, 510, etc.)

## Metric flight levels

China, Mongolia, Russia and many CIS countries use flight levels specified in metres. Aircraft entering these areas normally make a slight climb or descent to adjust for this.

• Track 000 to 179°
• FL 0300 m (1,000 ft)
• FL 0900 m (3,000 ft)
• FL 1500 m (4,900 ft)
• FL 2100 m (6,900 ft)
• FL 2700 m (8,900 ft)
• FL 3300 m (10,800 ft)
• FL 3900 m (12,800 ft)
• FL 4500 m (14,800 ft)
• FL 5100 m (16,700 ft)
• FL 5700 m (18,700 ft)
• FL 6300 m (20,700 ft)
• FL 6900 m (22,600 ft)
• FL 7500 m (24,600 ft)
• FL 8100 m (26,600 ft)
• FL 9000 m (29,500 ft)
• FL 10200 m (33,500 ft)
• FL 11400 m (37,400 ft)

• Track 180 to 359°
• FL 0600 m (2,000 ft)
• FL 1200 m (3,900 ft)
• FL 1800 m (5,900 ft)
• FL 2400 m (7,900 ft)
• FL 3000 m (9,800 ft)
• FL 3600 m (11,800 ft)
• FL 4200 m (13,800 ft)
• FL 4800 m (15,700 ft)
• FL 5400 m (17,700 ft)
• FL 6000 m (19,700 ft)
• FL 6600 m (21,700 ft)
• FL 7200 m (23,600 ft)
• FL 7800 m (25,600 ft)
• FL 8400 m (27,600 ft)
• FL 9600 m (31,500 ft)
• FL 10800 m (35,400 ft)
• FL 12000 m (39,400 ft)

## Alternative explanation of first part

An estimate of the real altitude is based on air pressure at the aircraft and the reported local air pressure at sea level (if there is no sea, this is a virtual value by adjusting the value at the ground for its elevation). However, to avoid collisions between two planes, their real altitudes are not important, but only the difference between them. This difference solely depends on the air pressure at both planes, and does not require knowledge of the local air pressure on the ground.

Therefore air traffic control assigns a plane a "flight level" (a nominal altitude), based on an altitude scale with a one-to-one correspondence with air pressure at the plane. Thus basically the plane is assigned an air pressure. The flight level corresponds to the real altitude that would be concluded from the air pressure, if the air pressure at sea level were 1013.2 mbar (29.92 inHg or 101.32 kPa).de:Flugfläche

• Art and Cultures
• Countries of the World (http://www.academickids.com/encyclopedia/index.php/Countries)
• Space and Astronomy

Information

• Clip Art (http://classroomclipart.com)